All of the 2TRIDENTS pruning shears adopted high-quality materials and strict quality control. The blades made with Ultra-fine Polishing Technology and Teflon or titanium coating, very sharp and prevent tree pulp adhesion caused by rust on the blades. Handle material is high-quality Aluminum and wrapped with a layer of PVC, very soft and comfortable to use.
- Rootstocks and Scions are easily matched by U-cut or Omega-cut for rapid healing.
- Easy to use and fast. Grafting method is more economical than the traditional method.
- Time and energy that blades can replace.
- Cut useless branches from plants with pruning.
Material: carbon steel, ABS and aluminium
Cut the grafted seedlings from 5mm to 1.4cm in diameter
Trimmer blade 3mm thickness
Cross screwdriver with red handle
Dimensions 27 cm x 10 cm / 10.5 inches x 3.9 inches
Graft adhesive bandwidth: 3cm/1.18""
Two additional blades
How to use:
Step 1: Place the graft in the grafting tool, press the handle to cut, and repeat this step to cut the stem of the donor plant. Be sure to cut slots in the factory.
Step 2: Slide the donor stem into the groove of the plant and match the cutting surface as much as possible. If stocks and donor factories are different in size, they can only be matched on one side.
Step 3: Put the sterile material at the joint and tie it with tape. The sterile material can prevent bacteria and climatic conditions.
Step 4: Use pruning to cut useless branches from plants.
Step 5: The blade with ""V&U&Omega"" blade and the blade at both ends can be cut. One blade can be used as two blades. There are six blades.
1 x Bonsai Pruning Shears